Forum Discussion

mmellin's avatar
mmellin
Level 3
5 months ago

Crossplane - failure to delete port resource in Claim

I have created a Claim that includes a Device, Port, PortVlanAttachment and a Vlan. In order to create the Port I have to pass the Device Eth1 port UUID to the 'spec.forProvider.portId' of the Port K...
crossplane
metal
mmellin's avatar
mmellin
Level 3

I'm definitely hitting this issue. I cannot tell if that is the reason for the following issue:

I can use a "Port" resource to "attach" a first vlan to the Device, but subsequent vlans added to the spec.forProvider.vlanIds array are not added to the Device. The message that shows in the condition is:

Message:               observe failed: cannot run refresh: refresh failed: Conflicting configuration arguments: "vlan_ids": conflicts with vxlan_ids
Conflicting configuration arguments: "vxlan_ids": conflicts with vlan_ids

Looking at the spec after this, the Port resource looks like this (not two UUIDs but only one Vxlan ID tag:

For Provider:
    Bonded:           false
    Port Id:          d07bd18c-641a-4f87-9d5b-b7ab1f9d2ec2
    Reset On Delete:  true
    Vlan Ids:
      0d0f0d89-a54c-42eb-b16a-0630fe9b4159
      22597c24-ac4e-4e0e-8802-16defe95deaa
    Vxlan Ids:
      1000

The UI (Networking > VLANS) shows only the first Vlan attached to a device, the other shows as 0. 

To be clear, here I am NOT using a portVlanAttachment - only Port as you've suggested. It looks as though I cannot add multiple vlans using this approach. I will try with portVlanAttachment and see if behavior is different.

mmellin's avatar
mmellin
Level 3
5 months ago

Using only a portVlanAttachment (and not a port) also does not work. I think this might be a bug? The condition event says this:

    Last Transition Time:  2024-07-17T00:47:06Z
    Message:               apply failed: POST https://api.equinix.com/metal/v1/ports/c6b1b719-5ea7-4509-8ede-ee46b05ce4d5/assign: 422 still bonded : 
    Reason:                ApplyFailure
    Status:                False
    Type:                  LastAsyncOperation

My resource definition looks like this:

---
apiVersion: metal.equinix.jet.crossplane.io/v1alpha1
kind: PortVlanAttachment
metadata:
  name: mmellinproj-equinix-sv-v1000
spec:
  forProvider:
    deviceIdSelector:
      matchLabels:
        jci.jnpr.net/equinix: device
    forceBond: False
    portName: eth1
    vlanVnid: 1000

It seems that the unbonding only occurs when a "Port" resource is created, although it is clearly specified here in the API. Then to attach vlans I must use a PortVlanAttachment. No other combination has been successful for me.